Tam Tech Concrete Removal
(Prevents Concrete Build-Up / Softens Concrete for Removal)
Tam Tech Concrete Removal will prevent concrete from bonding to equipment, ready-mix trucks,
screeds, tools, hoppers, conveyors, etc. It will also soften fresh concrete to ease the removal of the
concrete from many types of surfaces before it fully cures. It is also ideal for seasoning aluminum
forms prior to use.
Features & Benefits:
First remove the loose concrete from the surfaces to be coated. High pressure cold water preferred
for removal. Let dry. Do not dilute product. Spray product at 400 square feet per gallon. For
improved performance, spray product, remove softened concrete and then re-spray product. Also
for best results, spray product immediately following the placement of concrete to soften concrete
build-up and then spray again prior to next concrete pour. Tools and hardware may be soaked in
product for a couple of days for easy removal of concrete. For seasoning aluminum forms, the
forms should be clean and then placed in the sun to warm up prior to application at 400 sq ft per
5 gallon (18.9 L) pails and 55 gallon (208 L) drums
400 sq ft/ gallon (9.8 sq m/ liter)
Do not use as a form release agent. Product will not work after concrete cures for 2-3 days. Do
Two years in unopened containers.
Skin contact may cause irritation. Remove clothing if contaminated and wash skin thoroughly
with soap and water. If eye contact occurs, flush will water and contact physician.
Avoid prolonged breathing of vapors and prolonged skin contact. Use safety glasses and wear
rubber gloves. Use with adequate ventilation or if ventilation is poor, refer to MSDS for further
information. Do not use near heat or flame. Product is combustible. Do not cut the top off of
drum. See MSDS for complete information. For industrial use only. Keep out of reach of